COMPETITIVE ADVANTAGE
Ladle useful capacities | 2500÷6000 kg |
Refractory thickness | 180÷240 mm |
Longitudinal translation | With geared motor (stroke upon requirement) |
Orthogonal translation | 600 mm (different if required) |
Automatic pouring control | By brushless motor stopper rod (PSD) and pouring cup filling control by vision system (PIC) |
In-Stream inoculation | P7-05 |
Power supply | 3 x 400 V – 15 Kw |
Pouring temperature | 1350÷1450 °C |
Weighing system on-board | On-board |
LAP SYSTEM is an automatic pouring equipment specifically conceived for nodular cast iron.
It basically consists on an unheated pressure ladle, a stopper device for the flow adjustment, a control device with a PC / PLC supervision.
The equipment is suitable to pour on horizontal and vertical moulding lines. Its configuration can be arranged depending on customer requirements, it is always equipped with the in-stream inoculation system and, upon request, with the PIC vision system for the moulding boxes filling control and with a “Skip” for the LAP SYSTEM cast iron supply.
POSSIBLE OPTIONS
-
- Personal Computer with SCADA dedicated software
-
- PIC camera pouring control
-
- In-stream inoculation by means of DAI System P7 dosing unit
-
- Optic pyrometer
-
- Preheating gas burner
-
- LAN connection
-
- Skip for the automatic iron supply
COMPETITIVE ADVANTAGE
-
- Ladle useful capacities: 2500÷6000 kg
-
- Refractory thickness: 180÷240 mm
-
- Longitudinal translation : with geared motor (stroke upon requirement)
-
- Orthogonal translation: 600 mm (different if required)
-
- Automatic Pouring Control : by brushless motor stopper rod (PSD) and pouring cup filling control by vision system (PIC)
-
- In-Stream inoculation (P7-05)
-
- Power Supply: 3 x 400 V – 15 Kw
-
- Pouring temperature: 1350÷1450 °C
-
- Weighing system on-board